The HP OneLam 400 A3 has a fold-out lid that not only serves as a practical insertion aid, but also makes the device a particularly space-saving companion.
The practical backloader is suitable for hot and cold lamination and can be used for laminating foils with a thickness of 75/80 micron to 125 micron.
Whether you want to protect recipes, photos or children's drawings from wear and tear, the laminator seals your documents regardless of the format, from business cards to A3.
Warm-up time
Heated up in 2-4 minutes and ready for use for 80 microns
Film thickness
Applicable from 75/80 micron to 125 micron
format
Suitable from business cards to A3 documents
equipment
Including cutting ruler,
Corner rounder and foil set
The modern HP OneLam 400 A3 has an intuitive function button that is used to set the required temperature based on the selected film thickness and the reliable companion is heated up in 2-4 minutes.
In order to be able to dive straight into your lamination project, the scope of delivery not only includes a cutting ruler and a corner rounder, but also an extensive starter set of foils, which consists of three A4, four A5, four A6 and consists of four business card foils. The cutting ruler can be stowed in a practical compartment under the device so that you always have the accessories together.
With a speed of 400 millimeters per minute, the HP OneLam 400 A3 laminates a DIN A3 document in about 60 seconds. If you accidentally pushed the film with the document to be laminated into the backloader at a slight angle, a paper jam can occur.
Thanks to the lever for unlocking the roller, the film is released after actuation and can be carefully pulled out of the input side.
If you forget to switch off the device using the main switch, the laminator will stop heating after 30 minutes and switch to standby mode.
The device
Area of application: private household / hobby needs, office workplace
Laminating formats: from business cards to A3 format
Warm-up time: 2-4 minutes for 80 microns
Film thickness: 75/80 micron to 125 micron or 0.5 mm thickness
Application: hot and cold lamination
Laminating speed: 400 mm per minute
Backloader: fold-out lid as an insertion aid on the back
Temperature: 120 - 150 degrees Celsius
Heating system: 2 rollers are heated from the inside
Entry width: 330 mm
Color white
The accessories
Cutting ruler
Corner rounder
15-piece starter set (3 x A4, 4 x A5, 4 x A6, 4 x business cards)
The functions
Function button: On / Off, 75/80 micron, 125 micron, cold
Temperature controlled: each film thickness has its own temperature
Automatic standby mode: after 30 minutes
ABS function: lever to release the roller
The operating conditions
Voltage: 220-240V
Frequency: 50/60 Hz
Power: 400 W / 1.74 A
Motor type: AC
Dimensions: 460x140x86
Weight: 1.77kg