Compared to the HP OneLam 400 A3, the HP OneLam Combo A3 scores with an integrated cutting device, which makes it even easier to cut your documents in straight, corrugated or perforated form.
Thanks to the angle specifications and the centimeter grid, you can easily cut your laminated documents to the desired size.
Like the other laminators from the HP OneLam series, this practical backloader is also suitable for both hot and cold lamination.
With a film thickness of 75/80 micron to 125 micron, you can protect your pictures, timetables or important documents from business cards to A3 format from dirt and moisture.
Warm-up time
Heated up in 2-4 minutes and ready for use for 80 microns
Film thickness
Applicable from 75/80 micron to 125 micron
format
Suitable from business cards to A3 documents
equipment
integrated cutting device,
Corner rounder and foil set
With the HP OneLam Combo A3, the required temperature is set via an intuitive function button based on the selected film thickness and the modern backloader is ready for use in 2-4 minutes.
In addition to the integrated roll cutter and the corner rounder, the 15-piece starter set, consisting of three A4, four A5, four A6 and four business card foils, ensures immediate laminating fun.
The corner rounder can be stowed in a practical compartment under the device so that you always have the accessories together.
The all-rounder laminates at a speed of 400 millimeters per minute, which corresponds to a little more than 60 seconds for a DIN A3 document.
Did you accidentally push the film with the document to be laminated into the laminator at a slight angle and a paper jam occurred? No problem, because by pressing the lever to unlock the roller, the film is released and can be carefully pulled out of the input side.
If you have not switched off the HP OneLam Combo A3 using the main switch, the reliable helper automatically switches to standby mode after 30 minutes.
The device
Area of application: private household / hobby needs
Laminating formats: from business cards to A3 format
Warm-up time: 2-4 minutes for 80 microns
Film thickness: 75/80 micron to 125 micron or 0.5 mm thickness
Application: hot and cold lamination
Laminating speed: 400 mm per minute
Temperature: 120 - 150 degrees Celsius
Heating system: 2 rollers are heated from the inside
Entry width: 330 mm
Color white
The accessories
Integrated cutter for straight, wavy or perforated cuts
Corner rounder
15-piece starter set (3 x A4, 4 x A5, 4 x A6, 4 x business cards)
The functions
Function button: On / Off, 75/80 micron, 125 micron, cold
Temperature controlled: each film thickness has its own temperature
Automatic standby mode: after 30 minutes
ABS function: lever to release the roller
The operating conditions
Voltage: 220-240V
Frequency: 50/60 Hz
Power: 400 W / 1.74 A
Motor type: AC
Dimensions: 460x158x115
Weight: 1.65kg