Compared to its little brother from the HP Pro Laminator series, the HP Pro Laminator 600 A3 is suitable for larger tasks.
Because the elegant laminator in black design and high-quality glass surface seals your important documents up to A3 format.
The modern helper is not only suitable for menus, timetables and price lists, but also, for example, for place mats in restaurants.
Thanks to the lamination process, these documents are not only protected from dirt, they also score points with their wipeable property.
The powerful laminator warms up in just one minute and laminates an A3 page in less than 45 seconds.
This corresponds to a lamination speed of 600 millimeters per minute.
Warm-up time
Heated up and ready for use in just 60 seconds
speed
Laminated at a rapid 600 millimeters per minute
Film thickness
Applicable from 75/80 micron to 125 micron
format
Suitable from business cards to A3 documents
The HP Pro Laminator 600 A3 is suitable for both hot and cold lamination and protects your important documents with a film thickness of 75/80 microns up to 125 microns and a maximum total thickness of 0.5 millimeters.
The noble companion shines with an intuitive touch panel, with which the device is not only switched on and the correct temperature selected, but also a paper jam can be cleared.
If you have accidentally fed the film at an angle to the practical backloader with the foldable insertion aid and a paper jam has occurred, you can simply fix it at the push of a button and the film will be ejected again.
With the laminators from HP you can immerse yourself in your laminating pleasure, because the scope of delivery includes a 15-piece starter set consisting of three A4, four A5, four A6 and four business card foils .
Have you ever forgotten to turn off your HP Pro Laminator 600 A3? This too is not a problem because the device switches s I automatically after 30 minutes in standby mode and stops heating.
The device
Scope of application: companies, schools, offices
Laminating formats: from business cards to A3 format
Warm-up time: 60 seconds
Film thickness: 75/80 micron to 125 micron or 0.5 mm thickness
Application: hot and cold lamination
Laminating speed: 600 mm per minute
Backloader: with fold-out insertion aid on the back
Temperature: 130 - 160 degrees Celsius
Heating system: 2 rollers are heated from the outside
Entry width: 330 mm
Color: Black
The accessories
15-piece starter set (3 x A4, 4 x A5, 4 x A6, 4 x business cards)
The functions
Touch Panel: Power, 75/80 Micron, 125 Micron, Cold, Reverse
Temperature controlled: each film thickness has its own temperature
Automatic standby mode: after 30 minutes
ABS function: feedback at the push of a button
The operating conditions
Voltage: 220-240V
Frequency: 50/60 Hz
Power: 1450 W / 6.3 A.
Motor type: AC
Dimensions: 526x165x116.8
Weight: 2.92kg